Netgear Extender Dropping Connection? Here’s the Troubleshooting Guide!

Netgear extender is one of the most outstanding devices to turn dead zones into fun zones. Once you are connected to Netgear_ext, this tiny device let you access the blazing-fast and uninterrupted WiFi throughout your house. However, like any other WiFi device, Netgear extender is also prone to major networking issues. And one of the most common issues reported by users is Netgear extender dropping connection.

Fix: Netgear Extender Dropping Connection

Check the Distance Between the Netgear Extender and Your Router

Only a number or users know that the distance plays a very important role in getting stronger and uninterrupted WiFi signals. Remember, the more the distance between your Netgear extender and the router, the weaker the WiFi signal will become.

So, to fix Netgear extender dropping connection issue:

  • Plug in your Netgear extender and your router closer to each other.

  • Choose different-different wall plugs for them.

  • If you want to connect your Netgear extender to your router in a wireless manner, search for your router’s SSID and connect your Netgear extender with it.

  • In case of Ethernet connection, you must not use a dirty or nasty wire to connect your Netgear extender and router.

Still facing Netgear extender dropping connection issue? Worry not! Tell us, where you have placed your Netgear extender and your router? Have you placed them in a corner or inside cabinet? If something like that, then facing Netgear extender dropping connection issue is obvious. So, to get the most out of your extender and its WiFi signals, simply relocate it.

  • Do not place your Netgear extender and router in a corner or inside cabinet.

  • Place them away from the reach of the unknown WiFi network.

  • If you live in a big house, then place your Netgear extender and router at middle location of your house.

  • And if you have a small house, build a shelf, somewhere higher (according to the size of your device), and place your extender and your router there. Remember, you have to build 2 shelves (for your extender and router). Do not keep them on a single shelf as their WiFi signals may clash.

Note: While placing your extender and the router on a higher shelf, keep this in mind that you do not place them too closer to fall ceilings, fans, AC, doors, windows or thick walls. The distance between your Netgear extender and your router must not be less than 40 feet and not more than 60 feet.

Now, open an Apple device and access mywifiext local or open a Windows computer and access If the web address loads up without issue, then you have successfully fixed Netgear extender dropping connection issue. Just in case, the issue remains the same, head over to the next troubleshooting tip.

Power Cycle your Netgear Extender

Still your Netgear extender dropping connection? If yes, then opt for the power cycle process. To power cycle your Netgear extender:

  • Turn off your Netgear extender and unplug it from its power outlet.

  • Wait for 5-10 minutes.

  • Plug in your Netgear extender back and turn it on.

Apply the same process on your main router, PC, laptop, and smartphones. After the power cycle process, reconnect your WiFi-enabled devices to Netgear_ext and access the extender login page using

Pro Tip: Updating Netgear extender firmware will be helpful in many ways to fix all the extender-related issues. Not only this but also consider updating your router and your WiFi-enabled devices.

Improper Netgear Extender Setup

Partial or improper Netgear extender setup may also lead you to the Netgear extender dropping issue. Hence, check whether your Netgear extender is properly configured or not. On the off chance if you are facing Netgear extender setup issue, don’t hesitate to take instant help from our competent technicians.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *