The Ultimate Guide to Fix Can’t Access Error

Are you frustrated because of the constant appearance of the can’t access error message? If the answer is yes, then congrats! You have landed on the right page. With the help of this post, you’ll become aware of not just the reasons contributing to the mywifiext not working issue but also the solutions to get rid of it.

So, without any delay, let’s get this show on the road.

How to Troubleshoot Not Working Issue?

Place the Extender At the Right Location

Is your extender surrounded by thick concrete walls or transmitting appliances? If yes, change the location of your extender immediately. It is recommended that you place it in the centermost location of your house or office.

Also, keep your Netgear range WiFi extender away from transmitting appliances, metal objects, reflexive surfaces, Bluetooth devices, cordless phones, washing machines, microwaves, mirrors, and baby monitors. The reason being, technical appliances like these cause disruption in the WiFi signals of the extender.

Keep the Extender And Router In Close Proximity

Are your Netgear extender and home router placed next to each other? If the answer is no, then don’t waste any more time in placing your extender near about 1 to 3 feet to your router while performing a Netgear WiFi extender setup.

Additionally, DO NOT position your WiFi extender in a place that has little or no network signal. The reason being, a dead zone might stop you from accessing the web page.

Plug the Extender In a Working Wall Socket

Another reason leading to the not working issue is a damaged wall socket. Oh, God. Don’t tell me that you didn’t check the wall socket before plugging the extender into it! Well, if you didn’t, then ensure that your Netgear extender is plugged into a power source that is in good condition.

Once you have plugged your extender, press the Power button and wait for the LED light to turn solid. The minute the power LED light becomes solid, know that the wall socket you used is working! Hooray!

Use Mywifiext.local On Apple Devices

If you are the owner of an Apple or iOS device and are trying to log into your extender through, then oops! You have chosen the wrong path to walk on.

In order to log into your Netgear WiFi range extender, use mywifiext.local instead of The reason being, does not operate on Apple and iOS devices.

Make Use of the Default IP Address

Let’s say that you have entered the right web address but are still not able to access mywifiext, then what? Seems a little unfair, right? But, don’t worry. I have the perfect solution for you to fix this issue.

If the default web address isn’t helping you out, try using the IP address of your WiFi range extender. Not sure where to find it? Well, you are free to refer to the Netgear manual anytime.

Put the Junk Files In the Bin

After all the efforts that you’ve made, if you still aren’t able to access, then it might be because of a faulty web browser.

Make sure that you are using the updated version of your web browser to log into your Netgear WiFi extender. If updating the web browser doesn’t work for you, it is recommended that you clear its cache, junk files, and browsing history.

I hope the aforementioned tips were of help to you in getting rid of the not working issue. But, in case you still have any doubts or queries, feel free to reach out to me.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *